When the Last Trade Pulls Off Site, We Take It From There
After a construction project is finished in Queensbury or the Adirondack region, there is often leftover dirt and residue on the property. This can include concrete splatter, mortar haze, drywall dust, paint overspray, window marks, and debris on walkways or parking areas. Cleaning these materials properly requires the right methods, such as pressure washing, soft washing, and detailed cleaning, to remove them safely without damaging surfaces.
From concrete flatwork and building facades to windows, pavers, signage, loading docks, and surrounding hardscapes, we help contractors, property managers, and homeowners get newly finished properties ready for turnover.
If your project is nearing completion, call our team directly at 518-636-0605 or request a free quote to get your post-construction cleanup scheduled.
Every Exterior Surface We Touch After Construction Wraps
Driveways, Parking Lots, and Walkways: Cleaning Concrete Flatwork
Concrete surfaces often collect mortar splatter, cement residue, paint, tire marks, oil, grease, and construction dirt. We pre-treat, surface clean, rinse thoroughly, and apply a final treatment to remove buildup and organic growth. For oil and grease stains, we use commercial degreasers and scrubbing as needed.
One tip: Act fast. Once concrete splatter and mortar fully cure, the results become much harder to achieve.
Cleaning Siding, Brick, Block, and Stucco After a Build
Different surfaces need different cleaning approaches. Vinyl and aluminum can be cleaned with moderate pressure, while brick, block, EIFS stucco, and painted surfaces are cleaned using a gentle soft wash with specially mixed cleaning solutions to remove dirt safely without causing damage.
Post-Construction Glass: Clearing Silicone, Caulk, and Cement Film
Construction can leave glass covered with silicone overspray, caulk smears, cement dust, paint splatter, and debris in frames and tracks. We clean windows using pure-water, water-fed poles for spot-free results and traditional squeegee-and-mop methods where needed. Screen cleaning is available as an add-on.
Pavers, Patios, and Outdoor Hardscape
Newly installed pavers can collect concrete overspray, displaced joint sand, mortar stains, and construction debris. Before cleaning, we offer two options for addressing these issues, including high-pressure surface cleaning or a chemical soft wash. Since high-pressure cleaning may remove polymeric sand, we explain how each method works and help you select the option that matches your goals.
Signage, Storefronts, and the Customer-Facing Entry
Commercial properties collect construction dust, overspray, and residue on storefront glass, signage, canopies, and entryway hardscape. Because these front-facing areas shape the first impression for tenants, customers, and inspectors, we treat them with extra care. Plate glass and large windows are cleaned with a water-fed pole system for a streak-free finish, while sign faces, canopy panels, and entry concrete can be included in the same scope, so you do not have to coordinate multiple vendors before opening day.
Dumpster Pads, Loading Docks, and the Perimeter Most Contractors Forget
The back of the building takes a real beating during a build. Dumpster pads, loading dock aprons, rear service areas, and perimeter fencing or walls often collect heavy soiling over time from daily operations, vehicle traffic, waste handling activities, and general outdoor exposure. Our commercial degreaser capability covers the full perimeter, not just the show surfaces out front. For restaurant or food-service builds, cleaning the dumpster pad and loading dock with commercial degreasers is particularly important before a health inspector shows up.
Why Local Contractors
and Property Managers Hire Our Team
for Post-Construction Cleanup
Voted Best of the Region by the Post-Star, Six Years in a Row
ADK Pressure Washing has been voted Best of the Region by the Post-Star, the leading local newspaper for the Queensbury and Glens Falls area, for six consecutive years. Our award reflects the real-world reputation we’ve built with homeowners, contractors, and property managers across the Adirondack region, one job at a time.
Highest Google Review Count in the Region
We hold the highest Google review rating among local exterior cleaning providers serving the Queensbury area. In a market with multiple companies competing for the same work, the volume and quality of verified reviews is an unfiltered look at how clients actually experience the service. Check our Google profile and read the reviews for yourself.
Fully Insured and Ready for Commercial Vendor Vetting
Our team carries full insurance coverage. For general contractors, property developers, and commercial property managers, proof of insurance is a prerequisite for any vendor to step onto a site. We meet that standard every time. Coverage details are available upon request.
Family-Owned, Rooted in the Adirondack Region
As a family-owned company, we provide faster scheduling, direct accountability, and extensive familiarity with regional construction materials, environmental requirements, and seasonal climate conditions. Our local presence allows us to respond efficiently and deliver a level of personalized service that larger national companies may not offer.
The Right Equipment for Construction-Scale Contamination
Post-construction sites generate contamination at a scale that residential-grade gear simply can’t handle. We run professional systems across the board. We use our soft wash system for facades and sensitive materials, a high-pressure system for concrete and hardscape, dedicated surface cleaners, water-fed pole systems for windows, booster pumps, and lift equipment for multi-story commercial work.
Runoff Management and the Adirondack Watershed
We work extensively in and around the Adirondack Park, where lakes, streams, and wetlands make runoff management a genuine priority rather than a checkbox. Our process includes controlling on-site water flow, blocking and protecting storm drains with socks where necessary, minimizing chemical use, and adjusting cleaning methods to reduce runoff. For larger commercial projects, we have access to containment and recovery methods when site conditions require them. If your project is under an active stormwater permit, we work within those constraints from day one.
Need Post-Construction Cleanup on the Calendar? Let's Talk.
Our Post-Construction Process, Step by Step
Free On-Site Walkthrough and Written Estimate
Every commercial project starts with a free on-site walkthrough. No remote estimates.
During the visit, the team assess each affected surface, identify construction residue, note sensitive materials, review water access, traffic flow, drainage, and discuss scheduling with the property manager or developer.
Afterward, we provide a detailed written quote covering the scope, timeline, and site-specific considerations. For apartments or multi-tenant properties, we coordinate with management to notify tenants before work begins.
Pre-Service Communication and Site Preparation
Once the scope is agreed and the project is scheduled, we send a text message and an email confirming the date, time, and any preparation instructions.
For post-construction sites, prep usually means confirming the water spigot location, gate codes, and the site contact; identifying any surfaces to be excluded or handled with extra care (newly sealed asphalt, freshly painted areas, new landscaping); and coordinating around active business operations or pedestrian flow. You don’t need to be on site during the cleaning, as long as access details are confirmed in advance.
Pre-Treatment of Heavy Residue and Surface Protection
Before cleaning begins, we pre-wet sensitive areas around the work zone, including new landscaping and planters, to protect them from overspray.
Heavily soiled surfaces are pre-treated with the appropriate degreaser or bleach solution to break down bonded residue. For concrete flatwork, we use a controlled surfactant-and-bleach mix that is safe around plant material when applied correctly and thoroughly rinsed.
Any stop-work conditions, such as fresh sealant, new paint or stain, or compromised surfaces, are flagged during the walkthrough, not mid-job.
High-Pressure Washing of Concrete and Durable Hardscape
Next comes the pressure-wash phase for concrete driveways, parking lots, walkways, dumpster pads, and other hardscape. We use commercial-grade surface cleaners and high-pressure systems to blast away the loosened mortar, paint drips, and site grime that pre-treatment has lifted.
A thorough rinse follows, then a post-treatment of sodium hypochlorite to kill any remaining organic growth. For grease and oil contamination, which we often see on sites with equipment staging, generators, or food-service builds, we bring commercial-strength degreasers and scrub brushes into the mix before the pressure wash phase.
Soft Washing of Facades and Sensitive Surfaces
For vinyl siding, painted facades, brick, stucco, EIFS, and architectural cladding, we use a low-pressure soft wash with a properly diluted surfactant-and-bleach solution to remove construction dust, paint overspray, caulk smears, and surface film without damaging finished exteriors. Our crew manages overspray, keeps surrounding landscaping rinsed, and adjusts the method for stained wood, log surfaces, or other sensitive materials.
Paver and Hardscape Detail Cleaning
On paver patios, walkways, pool surrounds, and decorative hardscape, we review the available cleaning options with you before starting. This may include high-pressure surface cleaning or a chemical soft wash, depending on the condition of the surface and the desired approach.
The decision is made together based on whether you want to preserve polymeric sand joints or plan to re-sand. We slow down and hand-detail around pool coping and intricate areas.
Post-Construction Window Cleaning
Construction leaves the glass in rough shape. Silicone overspray, caulk smears, cement dust film, paint splatter. Our window cleaning program uses a water-fed pole system with deionized and reverse osmosis pure water, which leaves no mineral residue and dries spot-free without chemicals. Where the pole can’t reach, traditional squeegee-and-mop work takes over.
Screens, frames, and tracks all get cleaned as part of the scope. This step matters especially for commercial properties where storefront glass and office windows shape the first impression on customers and tenants.
Final Rinse, Photo Documentation, and Walkthrough
After cleaning, we perform a final rinse on every treated area to remove loosened residue and any remaining cleaning agent. Before-and-after photos are uploaded to the job invoice for closeout documentation, then we walk the site with your property manager or representative to review the work surface by surface. If you cannot be on site, we document conditions in the invoice and follow up by phone.
What a Post-Construction Cleanup Actually Costs in the Queensbury Area
How We Build Your Quote
Post-construction cleaning isn’t a flat-rate service. Every project carries its own scope, site conditions, surface mix, and access challenges, so we price each job to match what’s actually in front of us rather than running it through a fixed sheet. Exact pricing details are available upon request.
Every commercial post-construction job starts with a free on-site walkthrough. That’s how we determine the real scope of work, identify any surface that needs special handling, and produce a detailed written quote you can hand to your project owner or developer with confidence.
What Moves the Number Up or Down
These are the factors that shape your final quote:
- Total square footage of all surfaces to be cleaned
- Type and volume of construction debris
- Surface materials involved
- Accessibility and site conditions
- Proximity to water bodies or environmentally sensitive areas
- Timeline and scheduling urgency
Bundle Discounts and Recurring Commercial Contracts
- Bundle pricing: We offer bundled pricing when post-construction cleanup is paired with anchor services like house washing or roof cleaning, plus add-on services such as window cleaning, gutter cleaning, deck cleaning, and concrete cleaning. The discount is set per job rather than locked to a fixed percentage, so we can match the scope of your project.
- Recurring commercial contracts: Property developers managing multiple builds, multi-property portfolios, or large-scale projects can ask about preferred pricing for recurring maintenance contracts. We offer ongoing rates designed for clients who need consistent service across multiple sites or phases.
Our Commitment to a
Spotless Result You Can Sign Off On
If you have any concerns after the service, you can call our team. We go back out, assess what you’re seeing, and make it right. Our team stays accountable to every client on every job.
We are fully insured, so in the rare situation that a property concern arises, coverage is in place. You can request proof of insurance before your project is scheduled.
Hear From Contractors and
Property Owners Across the Region
Questions We Hear From Property Managers and Project Owners
Are the cleaning chemicals safe around newly installed landscaping?
Yes, when applied correctly. We use a surfactant-and-bleach solution, diluted to appropriate levels and similar in concentration to pool water, for most exterior cleaning. Before applying any solution, the crew pre-wets surrounding landscaping, planters, and sensitive areas. After cleaning, a thorough water flush dilutes any residual chemical contact. The process is designed to protect both the surfaces being cleaned and the surrounding environment.
What if there are freshly painted or newly sealed surfaces on the site?
We identify those during the initial on-site walkthrough. Fresh paint, newly applied stain, and recently sealed asphalt are stop-work conditions for those surfaces because applying sodium hypochlorite to fresh sealant can trigger a chemical reaction.
How soon after the build wraps should I schedule the cleanup?
As soon as possible. Construction residue, particularly concrete splatter, mortar haze, and cured silicone, becomes exponentially harder to remove the longer it sits. Once concrete splatter and mortar fully cure, achieving a clean, residue-free result becomes significantly more difficult and time-consuming, even with professional-grade equipment.
Getting us on the schedule right when the trade work wraps ensures we can remove these materials while they are still manageable, protecting the integrity of your newly installed surfaces.
Do you handle runoff and environmental compliance on commercial sites?
Yes. We manage runoff proactively on every commercial job. That means controlling on-site water flow, protecting storm drains with socks where necessary, minimizing chemical use, and adjusting cleaning methods based on site drainage conditions. We have access to containment and recovery methods for projects with specific site requirements.
Can you continue cleaning the property regularly after the build is complete?
Yes. Many of our commercial clients shift from a one-time post-construction cleaning to a recurring maintenance contract. For commercial properties, we recommend ongoing building washing, sidewalk and entryway cleaning, gutter cleaning, and window cleaning.
Get Your Free
Post-Construction Cleanup Quote in Queensbury, NY
If you have a project closing out in Queensbury, NY, or anywhere across the region we cover, we are the team to call.
Professional post-construction cleanup protects the property investment, helps surfaces pass inspection, and makes the right first impression on the people walking through the door for the first time. Call us at 518-636-0605 or request your free quote.